do not scale from this print 0.635 .0250 (no of pos -1) x 0.635[.0250] (tol non-accum) 2.69 .106 ref ref (no of pos x 0.635[.0250]) +1.500[.0591] 0.100 .0341 .0039 0.866 (see note 5) 0.670 0.100 .0264 .0039 (see note 5) max sway (either direction) 3 1.10 .043 ref designed & dimensioned in millimeters fig. 1 lss-120-01-xx-dv-a shown ( i n c h e s f o r r e f e r e n c e ) c p * 02 01 c1 see note 4 (no of pos x 0.635[.0250]) +4.750[.1870] ref 0.20 ref .008 .033 0.85 "b" ref ref 0.75 ref .030 "a" "a" (see table 3) lss-xx-01-dv-a c5 c-185-01-xx (see table 3) c3 scale 8 : 1 section "a"-"a" c2 c4 c6 (see table 3) 0.10 [.004] 4.600 .031 ref (typ) 0.80 .1811 0.130 "c" ref "a" .076[.0030] .0051 0.160 0.130 .0063 .0051 4.00 .157 ref 0.14 .006 ref contact: phos bronze see application views. samtec, inc. and shall not be reproduced 5. measure from top of vertical wall. dimensions are in millimeters. tolerances are: .xxx: sheet of .13 [.005] confidential and proprietary to this document contains information .xx: proprietary note purpose other than that which it was .051 [.0020] e - m a i l : i n f o @ s a m t e c . c o m c o d e : 5 5 3 2 2 .635mm terminal/socket combo material: lss-1xx-xx-xx-dv-xx-xx dwg. no. decimals angles description: disclosed to others or used for any or transferred to other documents or insulator: lcp, color: black 6. minimum pull out force for -lc is .75 lb. f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw unless otherwise specified, .3 [.01] 2 consent of samtec, inc. chad f by: d o n o t s c a l e d r a w i n g 07/01/2002 3 s h e e t s c a l e : 4 : 1 obtained without the expressed written 1 .x: notes: 1. represents a critical dimension. 2. burr allowance: .038 [.0015]. 3. minimum pushout force; terminals: .5 lbs, contacts: .5 lb. 4. pin 01 will mate with contact 02 on mating connector, 5 2 0 p a r k e a s t b l v d , n e w a l b a n y , i n 4 7 1 5 0 p h o n e : 8 1 2 - 9 4 4 - 6 7 3 3 f a x : 8 1 2 - 9 4 8 - 5 0 4 7 revision p option not released for production (see note 6) lss-1xx-xx-xx-dv-xx-xx no of positions -20, -30, -40, -50 (per row) (see fig. 3, sht 3) -k: polyamide film lead style -02: 6 mm -03: 4 mm plating specification (use c-185-xx-lg) -l: light gold -dv: double vertical (see fig 2, sht 2) -lm: light gold, matte tin tails (use c-185-xx-lm) (use k-500-300) -01: 3 mm -f: flash gold -tr: tape & reel (use c-185-xx-fg) option row specification -a: alignment pin -lc: locking clip (-02 & -03 lead styles only) (use lc-08-tm-01) * * b o d y h t " a " " b " " c " -01 4 . 4 9 6 [ . 1 7 7 0 ] 4 . 3 0 0 [ . 1 6 9 3 ] 1 . 5 9 6 [ . 0 6 2 8 ] -02 7 . 4 9 3 [ . 2 9 5 0 ] 7 . 3 0 0 [ . 2 8 7 4 ] 4 . 5 9 3 [ . 1 8 0 8 ] -03 5 . 4 9 3 [ . 2 1 6 3 ] 5 . 3 0 0 [ . 2 0 8 7 ] 2 . 5 9 3 [ . 1 0 2 1 ] t a b l e 1 leadstyle body pin -01 lss-xx-01-dv-a c-185-01-x -02 lss-xx-02-dv-a c-185-02-x -03 lss-xx-03-dv-a c-185-03-x t a b l e 3
sheet of .635mm terminal/socket combo by: lss-1xx-xx-xx-dv-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. d o n o t s c a l e d r a w i n g chad f 07/01/2002 3 2 s h e e t s c a l e : 4 : 1 revision p f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw 5 2 0 p a r k e a s t b l v d , n e w a l b a n y , i n 4 7 1 5 0 p h o n e : 8 1 2 - 9 4 4 - 6 7 3 3 f a x : 8 1 2 - 9 4 8 - 5 0 4 7 e - m a i l : i n f o @ s a m t e c . c o m c o d e : 5 5 3 2 2 10mm stack height lss-1xx-03-xx-dv-a lss-1xx-02-xx-dv-a p * 10.00 .394 packaging view tube: pt-1-24-01-134 plug: tp-03 9mm stack height lss-1xx-02-xx-dv-a lss-1xx-01-xx-dv-a 9.00 .354 tube: pt-1-24-05-29 plug: tp-09 12mm stack height lss-1xx-02-xx-dv-a lss-1xx-02-xx-dv-a 12.00 .472 tube: pt-1-24-02-15 plug: tp-03 lss-1xx-01-xx-dv-a lss-1xx-01-xx-dv-a 6mm stack height 6.00 .236 application views p * 8mm stack height lss-1xx-03-xx-dv-a lss-1xx-03-xx-dv-a p * 8.00 .315 7mm stack height lss-1xx-01-xx-dv-a lss-1xx-03-xx-dv-a p * 7.00 .276 l e a d s t y l e option p a c k a g i n g t u b e plug -01 -a pt-1-24-01-134 tp-24-02 -02 - a , - l c pt-1-24-05-29 tp-09 -03 - a , - l c pt-1-24-02-15 tp-03
3.5 .14 "e" 0.50[.020] 0.36 .014 14.2000 ref .559 (no of pos x 0.635[.0250]) +1.500[.0600] "d" fig. 3 -lc: locking clip option (use lc-08-tm-01) -02 & -03 lead styles only (see note 6, sht. 1) lc-08-tm-01 1.3966 ref .055 -k: polyamide film option (use k-500-300) fig. 2 e=((no of pos x 0.635 [.0250]) + 4.750 [.1870])/2) - 1.75 [.0689] sheet of .635mm terminal/socket combo by: lss-1xx-xx-xx-dv-xx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. d o n o t s c a l e d r a w i n g chad f 07/01/2002 3 3 s h e e t s c a l e : 4 : 1 revision p f:\dwg\misc\mktg\lss-1xx-xx-xx-dv-xx-xx-mkt.slddrw 5 2 0 p a r k e a s t b l v d , n e w a l b a n y , i n 4 7 1 5 0 p h o n e : 8 1 2 - 9 4 4 - 6 7 3 3 f a x : 8 1 2 - 9 4 8 - 5 0 4 7 e - m a i l : i n f o @ s a m t e c . c o m c o d e : 5 5 3 2 2 b o d y h t " d " -01 4 . 5 8 [ . 1 8 0 ] -02 7 . 5 8 [ . 2 9 8 ] -03 5 . 5 8 [ . 2 2 0 ] t a b l e 2
|
